Network error code 0x80070035?

[Ruwan Kumara]

Dear friends

In our office there is a home network for 6 pc in our division, from my computer i can log into all networks ( i mean share folder ) but two other computers cant access to my computer and shows a error code 0x80070035. I tried many ways as it is mentioned in internet , but i couldn't fix this problem.

Please help me on this

Thank you

[hbk]

>Can both computers ping ur pc and vicerversa, if yes then try disabling Norton coz many forums suggest to disable that

>Also try this if u haven't

1. Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
2. Right click on the connection that you use for the local connection, and then click "Properties".
3. Click Continue button to verify the administrator permission.
4. Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
5. Click "Advanced" button in the open window. On the "WINS" tab, click to select "Default", and then click "OK" to save the setting.

Final Steps:
1) Right click your local connection and select "disable" - wait for it to disable.
2) Once the connection is disabled, right click the local connection again and enable it.

Give your machine a few seconds to figure out it is back on the network and presto - your network drive will work again.

Root cause: Bug in Windows 7 networking - doesn't refresh the information about the drive. Windows 7 gets confused if the IP changes on the drive.

>Check the below link, it might be useful

http://www.techsupportforum.com/forums/f...75665.html