Fix Wireless Access Point?

[neng]

Hi all fri can you help to fix it I have wifi router when client connect to it so like this picture
I use tp-link model TL-WR941N but I use it as Wireless access points that provide DHCP from Mikrotik RouterBoard.
Please reply to me soon because it important in my workplace.
Thanks

[David]

Hi,

This seems like DHCP handshake is not getting done completely due to some reason which might be interference try changing the channel number for your router to transmit on a different frequency. Open up your router`s setup by entering the default gateway IP, enter username password if prompted ->go to WiFi or Wireless Lan setting and make sure that broadcasting is b/g/n mixed mode, then check what broadcasting channel is selected starting from 1 to 11/13, in case of extreme start or end make in middle like 6 or 7 and in case of any middle number like 6 to 8 make it either 10 or 3. By changing the broadcasting channel shall hopefully stop any interference with other frequencies.

Good Luck