This Forum has been archived there is no more new posts or threads ... use this link to report any abusive content
==> Report abusive content in this page <==
Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i have problems installing my wireless internet connection for PS3?
06-10-2014, 02:34 PM
Post: #1
i have problems installing my wireless internet connection for PS3?
i am currently having problems connecting to the internet on my ps3... when i test my connection, my id or ip is alright but the internet connection itself doesn't seem to work.. it says problem 8071020... something..
i am using the wireless-G 2.4 GHz 54 mbps broadband router from linksys.. if anybody can help!!!

Ads

Find all posts by this user
Quote this message in a reply
06-10-2014, 02:39 PM
Post: #2
 
google it

Ads

Find all posts by this user
Quote this message in a reply
06-10-2014, 02:49 PM
Post: #3
 
Power-cycle ALL network equipment.
Turn off (unplug) ALL of your network equipment, including any wireless access points, routers, Voice Over IP (VOIP) modems, and broadband modems for two (2) full minutes. See How to power cycle PLAYSTATION 3 network devices for more details.


Confirm that your internet connection is enabled.
In the XMBâ„¢ home menu, go to (Settings) > [Network Settings ] > [Internet Connection] and select [Enabled].

Scroll down to [Internet Connection Settings] and press the button.

When prompted, "Do you want to continue?" select [Yes].
On the next screen, select [Wireless] as your connection method and press the button.


Pick "Scan" and press the button.

From the list, pick your SSID and press the button

On the next screen, press right on the directional pad to continue - do NOT press the button to [Edit].


Pick your WLAN Security Setting (either WEP or WPA-PSK/WPA2-PSK).
If none, pick [None] (and skip the next step).
Press the x button.

If you selected a Security Setting, enter your security key with the keyboard.
Press the [Start] button to exit the onscreen keyboard.
Press right on the directional pad to proceed to the next screen.

The system will check your network configuration settings and display the information.
Press the x button to save these settings.

Test the connection on the next screen. Press the x button to start the test.

When the test is complete (usually less than a minute), it will display the results ("Succeeded" or "Failed").
If you have successfully connected to your network, congratulations, you have completed the network setup process.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)